2010 SUZUKI XL7 KEYLESS ENTRY REMOTE PROGRAMMING PROCEDURES:
Procedure #1
Vehicle must have a driver information center. Vehicles equipped with driver information center will
have button on the steering wheel with an "i" symbol .
1. Insert key into ignition and turn it to the on position. Do no start the car.
2. Press the Information button until Relearn Remote Key is displayed.
3. Press the set/reset button ( will have checkmark on button) until Remote key learning Active is
displayed.
4. Press and hold the Lock and Unlock button until vehicle chimes twice this signals successful
programming. Repeat this step for any additional remotes
5. Turn off ignition to exit programming
Procedure #2
Vehicles without the information center
1. Insert key into the ignition and turn it to the On position. Do not start the car.
2. Press the trip odometer reset button until Relearn Remote Key is displayed.
3. Hold the trip odomoter reset button until Remote Key Learning Active is displayed
4. Hold the lock and unlock buttons on the remote being programmed until the vehicle chimes. This
signals successful programming. Repeat step for additional remotes
5. Turn key to off to exit programming.
|
Order Now: Click to chat
