Home > Cadillac > 2000 > Escalade
Key Fob Keyless Entry Remote for 2000 Cadillac Escalade
Keyless remote programming instructions procedure for 2000 Cadillac Escalade

CLICK TO PRINT - 2000 Cadillac Escalade Free Keyless Remote Programming

1. Remove Radio fuse box. Fuse is numbered 17
2. Turn key from Off to Run position three times (ending in run). Do not start the Car ,turn to run
position this will not start the car. Locks will cycle from lock to unlock signaling entering programming
mode.
3. Hold Lock and Unlock on the remote being programmed. Doors will cycle again signaling successful
programming. Remote for any additional remotes.
4. Turn off ignition Replace radio fuse.