2 Key Fob Keyless Entry Remote for Honda Civic Pilot EX LX DX NHVWB1U523

2 New Keyless Entry Remote Key Fob for 2001-2005 Honda Civic & 2003-2007 Honda Pilot (NHVWB1U521, NHVWB1U523)

Alternative Views:

Availability:: Usually Ships in 24 Hours
Product Code: H_5213-X2

Price: $29.95

Item Condition

Condition :

New, never used replacement part

Qty:

Fits:

Programming Instructions

Included:	2 Complete key fobs with electronics and a battery
Condition:	New, never used replacement part
Replaces P/N:	72147-S5A-A01
For FCC ID:	NHVWB1U521, NHVWB1U523
For IC/Other:	08E61-S5D-1M002, 08E61-S5D-1M001, 38010-S5A-A, 6718944, 6754550
Programming:	Self programmable with one working key. Programming guide included with purchase

2001-2005 Honda Civic
2003-2007 Honda Pilot

REMOTE PROGRAMMING

Please make sure to read through the programming before attempting. All remotes that are expected to work for the vehicle will need to be with you in the vehicle before attempting the programming. Any remotes not present at the time of programming will cease to function until reprogrammed.

1. Enter the vehicle, close, and unlock all doors using the power lock switch on the driver’s door.

2. Within 4 seconds, with a key that is cut and working for the vehicle currently, insert the key into the ignition cylinder and turn to the ON position as far as it will go without starting. Leave in the ON position.

3. Within four (4) seconds using any remote (continue using the same remote for the following steps), press and release the LOCK button once (We recommend using a working remote if you have one to activate the programming mode).

4. Within four (4) seconds switch the key to the OFF position.

5. Repeat Steps 2-4 two (2) more times then proceed to step 6.

6. Within four (4) seconds turn the key to the ON position as far as it will go without starting and leave in the ON position, then within four (4) seconds press the LOCK button on the same remote you have been using.

At this point the vehicle door locks should automatically lock and unlock, indicating that the programming mode has been activated. (If the door locks do not cycle automatically then the programming procedure has failed and you need to restart the procedure from STEP 1)

7. Once the door locks stop cycling, within four (4) seconds press the LOCK button on the same remote you have been using. The door locks should automatically lock and unlock indicating that the remote programming has been accepted.

8. Repeat STEP 7 for all remaining remotes you wish to program (You can program up to 4 remotes total).

9. Once you have programmed all your remotes, exit the programming mode by turning the key off and removing it from the ignition.

10. Test all remotes to ensure they are functioning. If any do not function, restart the programming procedure from STEP 1 and switch the order in which you are programming the remotes (STEP 7).

Disclaimer:
This is a replacement part to match the original in form and function. All product names, brands, logos and or other trademarks within our sales information are the property of their respective owners. These are used to simplify the identification of the proper parts for a particular vehicle. None of the companies or trademarks affiliate with, endorse or sponsor us or our products.

Average Customer Review: Average Customer Review: 5 of 5