Home > Suzuki > 2007 > XL-7

Key Fob Keyless Entry Remote for 2007 Suzuki XL-7 KELYESS ENTRY REMOTE PROGRAMMING PROCEDURES: Procedure #1 Vehicle must have a driver information center.  Vehicles equipped with driver information center will have button on the steering wheel with an "i" symbol . 1. Insert key into ignition and turn it to the on position. Do no start the car. 2. Press the Information button until Relearn Remote Key is displayed. 3.  Press the set/reset button ( will have checkmark on button) until  Remote key learning  Active is displayed. 4. Press and hold the Lock and Unlock button until vehicle chimes twice this signals successful programming.  Repeat this step for any additional remotes 5.  Turn off ignition to exit programming Procedure #2 Vehicles without the information center 1.  Insert key into the ignition and turn it to the On position. Do not start the car. 2.  Press the trip odometer reset button until Relearn Remote Key is displayed. 3.  Hold the  trip odomoter reset button until Remote Key Learning Active is displayed 4.  Hold the lock and unlock buttons on the remote being programmed until the vehicle chimes.  This signals successful programming. Repeat step for additional remotes 5. Turn key to off to exit programming.