|
DO NOT RETURN THE KEY TO THE "LOCK" POSITION EACH TIME!! Go to position 1. Just above the "LOCK" position.
Regardless of what you have read in the owner’s manual this is the only way to enter programming mode.
Also, please note that you do not need to have the Lock/Unlock horn chirp enabled to hear the "entered programming mode indicator" honk or any of the other horn indications during the programming process.
That being said, this is the process to completeprogramming:
1. Unlock all doors 2. Open the driver-side door (My windows were rolled up) 3. Get in 4. Close the door 5. Insert the key 6. Turn it to the ON position (Don’t start the car) and back to position 1, just above the LOCK position 10-12 times within 15 seconds leaving it in the ON position. 7. The horn will chirp 8. Open and close the door 9. Press the unlock button on the first remote 10. The horn will chirp 11. Open and close the door 12. Press the unlock button on the second remote 13. The horn will chirp
Basically, continue opening and closing the door once before pressing the unlock button on the remaining remotes until you have programmed all of your remotes (4 is the max). When you are done, take the key out and you will hear some more horn chirps. Test the remotes.
|
Order Now: Click to chat
