Home > Dodge > 2012 > Caliber
Key Fob Keyless Entry Remote for 2012 Dodge Caliber
Sort By:
1
New Rubber Button Pad for KOBDT04A 3 BTN

Included: Button pad only, no electronics
Condition: New, never used replacement part
Replaces P/N: 56038749AD, 56038768AA, 56038768AD, 56038768A, 56038749AG
For FCC ID: KOBDT04A, K0BDT04A, KOBDTO4A
For IC/Other: 56038768AG, 05179514AA, 56038757AE, 56038757AH, 68004413AA
Installation: Remove old case and install new pad, no programming required

2007-2012 Dodge Caliber

2004-2010 Dodge Dakota

2004-2013 Dodge Durango

2005-2007 Dodge Magnum

2007-2012 Dodge Nitro

2006-2009 Dodge Ram 1500, Dodge Ram 2500, Dodge Ram 3500

2006-2007 Mitsubishi Raider

Price: $5.95
New Rubber Button Pad for OHT692427AA 3 BTN

Included: Button pad only, no electronics
Condition: New, never used replacement part
Replaces P/N: 5461A-692427AA, 5461A-692713AA, 3521A-T04B
For FCC ID: OHT692713AA, OHT692427AA, M3N5WY72XX
For IC/Other: 5135670, 267F-5WY72XX, 05183683AA
Installation: Remove old case and install new one, no programming required

2011-2013 Chrysler 200

2005-2007 Chrysler 300

2007-2009 Chrysler Aspen

2006-2010 Chrysler PT Cruiser

2008-2010 Chrysler Sebring

2004-2007 Chrysler Town and Country

2008-2013 Dodge Avenger

2004-2007 Dodge Caravan

2006-2007 Dodge Charger

2004-2007 Dodge Grand Caravan

2006-2007 Jeep Commander

2007-2015 Jeep Compass

2005-2007 Jeep Grand Cherokee

2007-2015 Jeep Patriot

Price: $5.95
Keyguardz Keyless Entry Remote Key Fob Cover Skin Jacket Protector

Protective silicone protective jacket

Price: $7.99
New Just the Case Shell Keyless Entry Remote Key Fob for KOBDT04A

Included: Case and button pad only, no electronics
Condition: New, never used replacement part
Replaces P/N: 05135670, 05179513, 05135670AA, 05175786AA
For FCC ID: KOBDT04A
For IC/Other: 55364672AD, 68003079AA, 05026134AD, 68003389AA
Installation: Cut and use, no programming required

2007-2012 Dodge Caliber

2004-2011 Dodge Dakota

2004-2013 Dodge Durango

2005-2007 Dodge Magnum

2007-2012 Dodge Nitro

2006-2009 Dodge Ram

2006-2007 Mitsubishi Raider

Price: $8.95
New Just the Case Flip Keyless Entry Remote Key Fob Shell for KOBDT04A

Included: Case and button pad only, no electronics
Condition: New, never used replacement part
Replaces P/N: 05135670
For FCC ID: KOBDT04A
For IC/Other: 3521A-T04B, 05179513, 05135670AA, 05175786AA, 56038751, 56053000AD, 56053000AH
Installation: Remove old case and install new one, no programming required

2007-2012 Dodge Caliber
2004-2011 Dodge Dakota
2004-2013 Dodge Durango
2005-2007 Dodge Magnum
2007-2012 Dodge Nitro
2006-2009 Dodge Ram
2006-2007 Mitsubishi Raider

Price: $9.95
New Replacement Transponder Ignition Chip Key for 46

Replacement transponder key

Price: $10.95
New Keyless Entry Remote Head Control Car Key Fob Replacement for OHT692427AA 3BTN

Complete key fob with electronics and a battery

Price: $24.95
New Keyless Entry Remote Head Control Car Key Fob Replacement for KOBDT04A 3BTN

Complete key fob with electronics and a battery

Price: $24.95
New Keyless Entry Remote Start Control Car Key Fob Replacement for KOBDT04A

Complete key fob with electronics and a battery

Price: $24.95
   
 
1

Keyless Remote Key Programming Procedure:

Click to Print - Keyless Remote Key Programming Procedure
  • You must have two working programmed keys to perform this procedure. If you do not have two working original keys you will need to have your new key programmed at a dealer or auto locksmith.
  • MOST 2010+ vehicles are dealer or auto locksmith program only! (this procedure may work depending on your trim level)

  • 1. Insert first programmed key into ignition and turn ignition switch to ON for 5 seconds. Do not exceed 15 seconds.
    2. Turn ignition switch to OFF and remove key.
    3. Insert second programmed key into ignition and turn ignition switch to ON. You must do this within 15 seconds of removing first key. After 10 seconds the immobilizer warning lamp will illuminate and an audible tone will be heard.
    4. Turn ignition switch to OFF and remove key.
    5. Within 60 seconds insert new un-programmed key into ignition and turn ignition switch to ON.
    6. After 10 seconds an audible tone will be heard and the immobilizer warning lamp will illuminate for 3 seconds.
    7. Turn ignition switch to OFF and remove key.
    8. For each additional key to be programmed you must start at step 1 and follow procedure again.You can have up to 8 keys programmed to vehicle.